Visiting card size is 3.5 x 2 inches (88.9 x 50.8mm) in North America, with 85 x 55mm in the UK and 85 x 54mm in Pakistan.
This guide covers every common visiting card size, plus the print settings — bleed, safe zone, and resolution — that keep your design from getting cut off.
Standard Visiting Card Size Chart (Inches, MM & Pixels)
| Measurement | Value |
|---|---|
| Inches (North America) | 3.5″ x 2″ |
| Millimeters (North America) | 88.9 x 50.8 mm |
| Millimeters (UK/Europe) | 85 x 55 mm |
| Centimeters | 8.9 x 5.1 cm |
| Pixels (300 DPI) | 1050 x 600 px |
The 3.5 x 2 inch size is the North American standard, while the UK and much of Europe round slightly smaller to 85 x 55mm. Both fit the same wallets and cardholders, so the difference rarely causes practical problems.
Visiting Card Size in Pakistan and South Asia
What is the size of a visiting card in Pakistan? Pakistan, along with India and Bangladesh, generally follows the 85 x 54mm (3.35″ x 2.13″) standard — nearly identical to the UK size, with a one-millimeter difference in height.
This regional sizing exists because printers across South Asia adopted the same metric-based standard used throughout Europe and the Gulf, rather than the inch-based North American format.
Visiting Card Print Bleed, Safe Zone & Resolution
Getting the dimensions right on screen means nothing if the print file isn’t set up correctly.
- Trim size — the final cut size of the card, typically 3.5″ x 2″
- Bleed area — extend artwork 0.11″ (2–3mm) past the trim edge on all sides, bringing the file to roughly 3.61″ x 2.11″
- Safe zone — keep text and logos at least 0.125″ to 0.25” inside the trim line
- Resolution — set files to 300 DPI in CMYK color mode for accurate print color
Skipping the bleed step is the most common mistake in DIY card design. Without it, trimming machines can leave thin white edges where the background color should run flush to the border.
Is a Business Card 2×3?
Is a business card 2×3 inches? Not quite. The standard is 3.5″ x 2″, not 2″ x 3″ — a small but common mix-up since both numbers appear in the dimension.
A true 2″ x 3” card would be noticeably more square-shaped and wouldn’t fit most standard-size cardholders, which are built around the 3.5″ width.
How to Create and Design a Visiting Card
How can I create a visiting card? Start with a design tool or template set to the correct trim size for your region, then build your layout inside the safe zone before adding bleed.
How do you design a visiting card? Keep the layout simple: name and title as the visual anchor, contact details secondary, and no more than one accent color beyond black and white. Crowded cards are harder to read at a glance — the opposite of what a visiting card is for.
Read More: MTG Card Dimensions: Size Guide (In, MM & Pixels)
Frequently Asked Questions
What is the size of a visiting card?
The standard visiting card size is 3.5″ x 2″ (88.9 x 50.8mm) in North America, or 85 x 55mm in the UK and Europe.
What is the size of a visiting card in Pakistan?
In Pakistan, the standard visiting card dimension is 85 x 54mm (3.35″ x 2.13″), closely matching the UK and broader South Asian standard.
What is visiting card size in px?
At 300 DPI print resolution, a standard visiting card measures 1050 x 600 pixels.
Is a business card 2×3?
No. The standard size is 3.5″ x 2″, not 2″ x 3″ — the numbers are often confused but refer to different proportions.
What is the standard visiting card layout?
Most layouts place the name and job title prominently, with contact details (phone, email, address) below or to one side, and a logo or icon as a visual anchor.
How can I create a visiting card?
Use a design template set to the correct trim size for your region, keep text inside the safe zone, and export the file at 300 DPI in CMYK before sending it to print.
How big is a standard card size?
A standard visiting card measures 3.5″ x 2″ (88.9 x 50.8mm) in North America, with minor regional variations elsewhere.
How do you design a visiting card?
Keep the design simple and legible: clear hierarchy between name and contact details, minimal colors, and all key text placed safely inside the trim margins.
Conclusion
Visiting card size mostly comes down to region: 3.5″ x 2″ in North America, 85 x 55mm in the UK, and 85 x 54mm across Pakistan and South Asia. Once you lock in the right dimension and bleed settings, the rest of the design process gets a lot simpler.
Hi, I’m John Smith, the admin at BedDimensionsChart.com. I make measurements simple and easy to understand, from bed sizes to everyday length conversions. Clear guides. Accurate dimensions. No confusion.